Ford Differentials

How to Rebuild the 8.8 and 9 Inch
Author: Joseph Palazzolo
Publisher: CarTech Inc
ISBN: 161325038X
Category: Transportation
Page: 144
View: 5839
DOWNLOAD NOW »
The Ford 8.8- and 9-inch rear differentials are two of the most popular and best-performing differentials on the market. While the 8.8-inch differential is commonly used in late-model Mustangs, the 9-inch is the more popular and arguably the most dominant high-performance differential for muscle cars, hot rods, custom vehicles, and race cars. Built from 1957 to 1986, the 9-inch Ford differential is used in a huge range of high-performance Ford and non-Ford vehicles because of its rugged construction, easy-to-set-up design, and large aftermarket support. The 9-inch differential effectively transmits power to the ground for many classic Fords and hot rods of all types, but it is the choice of many GM muscle car owners and racers as well. These differentials have been used extensively and proven their mettle in racing and high-performance applications. The Ford 8.8- and 9-inch must be rebuilt after extensive use and need a variety of different ratios for top performance and special applications. This Workbench book provides detailed step-by-step photos and information for rebuilding the differentials with the best equipment, installing the gear sets, and converting to Posi-Traction for a variety of applications. It describes how to disassemble the rear end, identify worn ring and pinion gears, other damage or wear, and shows step-by-step rebuilding of the differential. It also explains how to select the right differential hardware, bearings, seals, and other parts, as well as how to set ring and pinion backlash so that the rear end operates at peak efficiency. Aftermarket 9-inch performance differentials from manufacturers including Currie, Moser and Strange are reviewed and you learn how to rebuild and set up these high-performance aftermarket differentials. In addition, this book provides a comprehensive identification chart to ensure readers properly identify the model and specifics of the 9-inch differential. Chapters include axle identification, inspection, and purchasing axles for rebuilding; differential tear down; ring and pinion gear removal; inspection and reassembly; drive axle choices; and more.

Chevy Differentials

How to Rebuild the 10- and 12-Bolt
Author: Jefferson Bryant
Publisher: CarTech Inc
ISBN: 1613251610
Category: Transportation
Page: 144
View: 4812
DOWNLOAD NOW »
Millions of Chevrolet vehicles were built and sold in the 1960s and 1970s, and the great majority of those were rear-wheel-drive models with differentials known as 10-bolts or 12-bolts. High-performance limited-slip versions of these differentials also have been installed in Camaros, Chevelles, Corvettes, and many other GM muscle cars from 1964 through the 1970s, as well as Chevy and GMC trucks. If you have owned a GM performance car from the 1960s or 1970s, you have owned one of these sturdy, reliable, and versatile differentials. Many of these differentials are now more than 50 years old and are due for an overhaul. In Chevy Differentials: How to Rebuild the 10- and 12-Bolt, author Jefferson Bryant walks you through the entire process of procuring, evaluating, and rebuilding the perfect differential for your GM application. In this step-by-step guide, you learn how to completely disassemble the differential, evaluate components, and select replacement parts. You're also shown all of the up-to-date techniques for re-assembling the differential and axle. Informative sections on axle identification and replacement parts are also provided. Maybe you have found a salvage-yard unit and want to rebuild it to upgrade your existing vehicle. Maybe you would like to install an aftermarket 12-bolt assembly for extreme performance or racing. This is the only book dedicated solely to rebuilding, setting up, and modifying these axle assemblies for long service life and maximum performance. If you’re going to rebuild a Chevy 10- or 12-bolt axle, this book delivers the essential information to get the job done right.

How to Rebuild and Modify High-Performance Manual Transmissions


Author: Paul Cangialosi
Publisher: CarTech Inc
ISBN: 1934709298
Category: Transportation
Page: 144
View: 7879
DOWNLOAD NOW »
How to Rebuild and Modify High-Performance Manual Transmissions breaks down the disassembly, inspection, modification/upgrade, and rebuilding process into detailed yet easy-to-follow steps consistent with our other Workbench series books. The latest techniques and insider tips are revealed, so an enthusiast can quickly perform a tear-down, identify worn parts, select the best components, and successfully assemble a high-performance transmission. Transmission expert and designer Paul Cangialosi shares his proven rebuilding methods, insight, and 27 years of knowledge in the transmission industry. He guides you through the rebuilding process for most major high-performance transmissions, including BorgWarner T10 and super T10, GM/Muncie, Ford Toploader, and Tremec T5. This new edition also contains a complete step-by-step rebuild of the Chrysler A833 transmission.

How to Build Big-Inch Ford Small Blocks


Author: George Reid
Publisher: CarTech Inc
ISBN: 1884089836
Category: Transportation
Page: 128
View: 6744
DOWNLOAD NOW »
In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.

Ford Y-Block Engines: How to Rebuild & Modify


Author: Charles Morris
Publisher: CarTech Inc
ISBN: 1613250614
Category: Transportation
Page: 136
View: 334
DOWNLOAD NOW »
As Ford’s follow-up to the famous flathead, the Y-block was Ford’s first overhead-valve V-8 and it established an impressive high-performance legacy, winning many races in NASCAR and setting records at the Bonneville Salt Flats. This venerable Ford engine, which powers classic Thunderbirds, Crown Victorias, Edsels, and other cars, is enjoying a performance renaissance. Many aftermarket parts, including heads, can turn a sedate Y-block into a powerhouse. The engine earned its name from its deep-skirt block design that looked like a “Y.” This stout engine was installed in millions of Ford cars from 1954 to 1962 and Ford trucks from 1952 to 1964. Author and Ford tech expert Charles Morris explains each critical aspect of rebuilding a stock 239-, 256-, 272-, 292-, and 312-ci Y-block and building a modified Y-block. He shows you how to identify components and conduct a thorough inspection so you select a sound block, heads, intake, and other components. He explains the specifics for obtaining high-quality machining work and verifying clearances. In addition, he delves into the intricacies of each step of the assembly process so you can rebuild a strong-running and reliable engine. Most important, Morris details the steps to effectively remedy the Y-block oiling problems. This is the book Ford Y-block owners and fans have been waiting for. It’s an indispensible guide for performing a professional-caliber rebuild and buildup of the Y-block.

How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions


Author: George Reid
Publisher: CarTech Inc
ISBN: 1934709824
Category: Transportation
Page: 144
View: 3628
DOWNLOAD NOW »
In How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions, author George Reid walks readers through the process step-by-step, from removing the transmission, to complete overhaul, to proper re-installation and road testing.

Jeep, Dana and Chrysler Differentials

How to Rebuild the 8-1/4, 8-3/4, Dana 44 and 60 and AMC 20
Author: Larry Shepard
Publisher: CarTech Inc
ISBN: 1613250495
Category: Transportation
Page: 176
View: 4093
DOWNLOAD NOW »
Over the last 40 years, millions of Chrysler, AMC, and Jeep vehicles have used these differentials, propelling these high-performance vehicles to victory on the street, in drag racing, and other applications. Chrysler used the Dana 60 and BorgWarner Sure-Grip high-performance differentials in the Challenger, Charger, Barracuda, Super Bee and many other renowned Chrysler muscle cars. These differentials have been tied to historic powerhouse engines, such as the Chrysler Magnum and Hemi V8s in stock car, drag racing, and other forms of racing, making history in the process. Jeep CJs and Cherokees have used the Dana 44 and AMC 20 and put these differentials under tremendous loads, which often requires frequent rebuilds. After years of use, these differentials require rebuilding, and of course aftermarket suppliers offer ring and pinion and other parts to upgrade these axles. In this Workbench series title, the focus is on the disassembly, inspection and step-by-step rebuild of the most popular high-performance differentials. Axles and differentials are not incredibly complex components, but there are some specific steps to follow for rebuilding, upgrading, and setting them up properly, and this book demystifies the process and explains it in detail. A book dedicated to the Dana, Sure-Grip, and AMC Jeep axles has never been published before, and Mopar, Jeep and AMC enthusiasts are hungry for this information. The Dana and AMC axles should remain in wide use into the foreseeable future, and therefore there will be a consistent demand for this information. This book will also feature extensive gear and application charts, so the reader is sure to select the correct gear ratio for a particular vehicle and application. Special coverage is therefore dedicated to ring and pinion gears. In addition selecting the best aftermarket and production axle shafts is covered as well as modifying and upgrading the differential housings.

Ford 351 Cleveland Engines

How to Build for Max Performance
Author: George Reid
Publisher: CarTech Inc
ISBN: 1613250487
Category: Transportation
Page: 144
View: 6018
DOWNLOAD NOW »
Ford's 351 Cleveland was designed to be a 'mid-sized' V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. This unique design proved itself under the hood of Ford's Mustang, among other high performance cars. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small blocks offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting number(s) are shown. In addition to this, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400M cousins are now seen as great engines to build. This book will walk you through everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

How To Rebuild and Modify Your Manual Transmission


Author: Robert Bowen
Publisher: N.A
ISBN: 9781610609999
Category:
Page: N.A
View: 3941
DOWNLOAD NOW »


Ford AOD Transmissions

Rebuilding and Modifying the AOD, AODE and 4R70W
Author: George Reid
Publisher: CarTech Inc
ISBN: 1613251149
Category: Transportation
Page: 144
View: 9457
DOWNLOAD NOW »
While millions of Ford rear-wheel-drive cars are equipped with the durable and simple C4 and C6 transmissions of the 1960s, early in the 1980s Ford replaced those old designs with the AOD transmission for a new generation of cars. Overdrive gears, once popular before WWII, were now becoming popular again, as manufacturers were under increasing pressure to raise fuel economy to meet ever more demanding EPA standards. A nice byproduct of that was more comfortable cruising speeds, where your engine didn't have to work so hard in addition to getting better fuel economy. In Ford AOD Transmissions: Rebuilding and Modifying the AOD, AODE and 4R70W, author George Reid walks you through the process step-by-step, from removing the transmission from the vehicle, to complete disassembly and cleaning, to careful reassembly, to proper re-installation and road testing. Performance modifications are also covered, as well as an ID guide for various model numbers, evolutionary design changes, shift kit installation, and torque converter selection. This book is ideal for people who already have one of these transmissions in their car, as well as enthusiasts who would like to swap one of these more modern units into an older chassis to get all the benefits of overdrive. If you plan on researching or working on any one of these overdrive models, this book is a vital addition to your workbench or library.

How to Rebuild Small-Block Ford Engines


Author: Tom Monroe
Publisher: Penguin
ISBN: 9780912656892
Category: Transportation
Page: 160
View: 6899
DOWNLOAD NOW »
Provides detailed instructions for the examination, disassembly, maintenance, repair, reassembly, and installation of small-block Ford eight cylinder engines

How to Rebuild the Small-Block Ford


Author: George Reid
Publisher: CarTech Inc
ISBN: 1932494898
Category: Transportation
Page: 144
View: 5168
DOWNLOAD NOW »
This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

High-Performance Differentials, Axels, and Drivelines


Author: Joseph Palazzolo
Publisher: CarTech Inc
ISBN: 1934709026
Category: Transportation
Page: 144
View: 3140
DOWNLOAD NOW »
Covers everything you need to know about selecting the most desirable gear ratio, rebuilding differentials and other driveline components, and most importantly, matching the correct driveline components to engine power output.

How to Build Max-Performance Ford FE Engines


Author: Barry Rabotnick
Publisher: CarTech Inc
ISBN: 1934709158
Category: Transportation
Page: 144
View: 6219
DOWNLOAD NOW »
The Ford FE (Ford Edsel) engine is one of the most popular engines Ford ever produced, and it powered most Ford and Mercury cars and trucks from the late 1950s to the mid-1970s. For many of the later years, FE engines were used primarily in truck applications. However, the FE engine is experiencing a renaissance; it is now popular in high-performance street, strip, muscle cars, and even high-performance trucks. While high-performance build-up principles and techniques are discussed for all engines, author Barry Rabotnick focuses on the max-performance build-up for the most popular engines: the 390 and 428. With the high-performance revival for FE engines, a variety of builds are being performed from stock blocks with mild head and cam work to complete aftermarket engines with aluminum blocks, high-flow heads, and aggressive roller cams. How to Build Max-Performance Ford FE Enginesshows you how to select the ideal pistons, connecting rods, and crankshafts to achieve horsepower requirements for all applications. The chapter on blocks discusses the strengths and weaknesses of each particular block considered. The book also examines head, valvetrain, and cam options that are best suited for individual performance goals. Also covered are the best-flowing heads, rocker-arm options, lifters, and pushrods. In addition, this volume covers port sizing, cam lift, and the best rocker-arm geometry. The FE engines are an excellent platform for stroking, and this book provides an insightful, easy-to-follow approach for selecting the right crank, connecting rods, pistons, and making the necessary block modifications. This is the book that Ford FE fans have been looking for.

How to Rebuild Ford Engines


Author: Tom Monroe
Publisher: Penguin
ISBN: 9780895860361
Category: Transportation
Page: 160
View: 491
DOWNLOAD NOW »
Photographs illustrate how to disassemble, check for wear, repair or recondition, and reassemble and install Ford V8 engines

Jeep, Dana and Chrysler Differentials

How to Rebuild the 8-1/4, 8-3/4, Dana 44 and 60 and AMC 20
Author: Larry Shepard
Publisher: CarTech Inc
ISBN: 1613250495
Category: Transportation
Page: 176
View: 1935
DOWNLOAD NOW »
Over the last 40 years, millions of Chrysler, AMC, and Jeep vehicles have used these differentials, propelling these high-performance vehicles to victory on the street, in drag racing, and other applications. Chrysler used the Dana 60 and BorgWarner Sure-Grip high-performance differentials in the Challenger, Charger, Barracuda, Super Bee and many other renowned Chrysler muscle cars. These differentials have been tied to historic powerhouse engines, such as the Chrysler Magnum and Hemi V8s in stock car, drag racing, and other forms of racing, making history in the process. Jeep CJs and Cherokees have used the Dana 44 and AMC 20 and put these differentials under tremendous loads, which often requires frequent rebuilds. After years of use, these differentials require rebuilding, and of course aftermarket suppliers offer ring and pinion and other parts to upgrade these axles. In this Workbench series title, the focus is on the disassembly, inspection and step-by-step rebuild of the most popular high-performance differentials. Axles and differentials are not incredibly complex components, but there are some specific steps to follow for rebuilding, upgrading, and setting them up properly, and this book demystifies the process and explains it in detail. A book dedicated to the Dana, Sure-Grip, and AMC Jeep axles has never been published before, and Mopar, Jeep and AMC enthusiasts are hungry for this information. The Dana and AMC axles should remain in wide use into the foreseeable future, and therefore there will be a consistent demand for this information. This book will also feature extensive gear and application charts, so the reader is sure to select the correct gear ratio for a particular vehicle and application. Special coverage is therefore dedicated to ring and pinion gears. In addition selecting the best aftermarket and production axle shafts is covered as well as modifying and upgrading the differential housings.

Ford Big-Block Parts Interchange


Author: George Reid
Publisher: CarTech Inc
ISBN: 1613253443
Category: Transportation
Page: 144
View: 5438
DOWNLOAD NOW »
Over the course of performance car history, and specifically muscle car history, big-block engines are particularly beloved, and for good reason. Not only are they the essence of what a muscle car is, but before modern technology and stroker engines, they were also the best way to make a lot of horsepower. All of the Detroit manufacturers had their versions of big-block engines, and Ford was no exception. Actually, Ford was somewhat unique in that it had two very different big-block engine designs during the muscle car era. The FE engine was a design pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design because cars were becoming bigger and heavier, and therefore, necessitated more power to move. What started as torquey engines meant to move heavyweight sedans morphed into screaming high-performance mills that won Le Mans and drag racing championships through the 1960s. By the late 1960s, the design was dated, so Ford replaced the FE design with the "385" series, also known as the "Lima" design, which was more similar to the canted-valve Cleveland design being pioneered at the same time. It didn't share the 1960s pedigree of racing success, but the new design was better in almost every way; it exists via Ford motorsports offerings to this day. In Ford Big-Block Parts Interchange, Ford expert and historian George Reid covers both engines completely. Interchange and availability for all engine components are covered including cranks, rods, pistons, camshafts, engine blocks, intake and exhaust manifolds, carburetors, distributors, and more. Expanding from the previous edition of High-Performance Ford Parts Interchange that covered both small- and big-block engines in one volume, this book cuts out the small-block information and devotes every page to the FE Series and 385 big-blocks from Ford, which allows for more complete and extensive coverage. p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Arial}

How to Rebuild Big-Block Ford Engines


Author: Charles Morris
Publisher: CarTech Inc
ISBN: 1932494928
Category: Transportation
Page: 144
View: 4874
DOWNLOAD NOW »
All engines are covered in full detail in this Workbench series rebuild volume. Included are step-by-step heavily illustrated instructions, that walk you through the entire process of rebuilding your Ford engine. If you want to breathe new life into your tired old Ford engine, this is the book for you.

Ford FE Engines

How to Rebuild
Author: Barry Rabotnick
Publisher: CarTech Inc
ISBN: 1613252447
Category: Transportation
Page: 144
View: 2178
DOWNLOAD NOW »
Ford FE engines, which were manufactured from the late 1950s all the way through the mid-1970s, were designated as the large-displacement engines in the Ford lineup. FE means Ford Edsel, and reflects an era when Ford sought to promote the Edsel name. The design of these engines was implemented to increase displacement over its predecessor, the Y-Block engines of the previous decade. Early models were fairly modest in displacement, as were most big-blocks of the era, but they grew quickly to fill the needs of rapidly changing chassis requirements and consumer demand for larger vehicles. As it grew, the FE engine performed admirably as a heavy passenger car and light truck engine. It also became quite accomplished in performance circles, winning the 24 Hours of Le Mans, as well as powering Ford’s muscle car and drag racing programs in the mid- to late 1960s. In this book, you will learn everything you need to know to rebuild one of these legendary engines. CarTech's unique Workbench series format takes you step-by-step through the entire rebuilding process. Covered are engine identification and selection, disassembly, cleaning, parts analysis and assessment, machine shop processes, replacement parts selection, re-assembly and start-up/break-in techniques. Along the way you find helpful tips on performance upgrades, trouble spots to look for, special tools required, and professional builder's tips. FE master, owner of Survival Motorsports, and veteran author Barry Rabotnick shares all of his tricks and secrets on building a durable and reliable FE engine. Whether you are simply rebuilding an old truck for reliable service use, restoring a 100-point show car, or building the foundation for a high-performance street and strip machine, this book will be an irreplaceable resource for all your future FE engine projects.